Shop headings: New Spares | Used Spares | Accessories | Brands
Flywheel for models with Digiplex ignition
Weighs 4.3kg
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
29067040 GU29067040 29 06 70 40
2906 7040 2906.7040 29.06.70.40
Prices from
£90.00 - £130.00
inc VAT dependent on condition
Rubber cover for Domino clutch lever and choke cable
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
27663815 GU27663815 27 66 38 15
2766 3815 2766.3815 27.66.38.15
£2.00
INC VAT
£1.67 EX VAT
Brembo PS 13 handlebar mounted clutch master cylinder. Suitable for use with our hydraulic clutch conversion ACA77610
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
Prices from
£40.00 - £75.00
inc VAT dependent on condition
Dimensions:
80mm OD
Blue faced speedo, cable reset. Reads to 160 MPH
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
17761660 GU17761660 17 76 16 60
1776 1660 1776.1660 17.76.16.60
Prices from
£60.00 - £120.00
inc VAT dependent on condition
Dimensions:
80mm OD
Blue faced speedo, cable reset. Reads to 240 KPH
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
28761540 GU28761540 28 76 15 40
2876 1540 2876.1540 28.76.15.40
Prices from
£30.00 - £60.00
inc VAT dependent on condition
Dimensions:
M8 body 50cm lead
Cut out switch, threaded body. Used as sidestand switch on big twins and clutch cut out switch on V7 series small twins and Breva 750
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
29759150 GU29759150 29 75 91 50
2975 9150 2975.9150 29.75.91.50
£30.00
INC VAT
£25.00 EX VAT
Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle).
This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
See BRA33204 for brake pads
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
Prices from
£60.00 - £120.00
inc VAT dependent on condition
PS 15 master cylinder cap with level switch
PS15 cap
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
18667450 GU18667450 18 66 74 50
1866 7450 1866.7450 18.66.74.50
£10.00
INC VAT
£8.33 EX VAT
Dimensions:
11.6mm internal diameter mounting hole
Adjustable front black brake lever for PS 11, PS 13 and PS 16 rectangular master cylinder.
Also known as Guzzi ref. 28605678. See BRA01630 or BRA01640 for a span adjustable alternative and HAA10850 for lever pivot pin
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
10270640 GU10270640 10 27 06 40
1027 0640 1027.0640 10.27.06.40
£14.00
INC VAT
£11.67 EX VAT
Fuel tank, normally sold without flap. Variety of colours available, all are fuel tight. Secured by strap at rear, two threaded spigots at rear for fuel taps. Side panels clip to this tank
Also known as Guzzi ref. 30100282 and 28100211
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
28100233 GU28100233 28 10 02 33
2810 0233 2810.0233 28.10.02.33
Prices from
£60.00 - £150.00
inc VAT dependent on condition
We are currently working on cataloguing and listing all our used stock for this web site however with tens of thousands of used spares it's taking some time!
In the meantime if you can't see what you are looking for please call us on 01484 841395 or fill in the used spares enquiry form for used spares enquiries.
Secure online shopping 
